Are you in the trade?

Visit our trade site here

and apply for up to 30% off"

Price Match

Steinel Presence Control Air Control PRO Signal AP

steinel sensors - steinel warranty Steinel Air Control PRO Signal AP

The Steinel Air control PRO Signal indicates via LEDs the current air quality, a constant green LED signals a CO2 concentration of less than 1000ppm, orange indicates between 1000 and 1500ppm and red is greater than 2000ppm. Ventilation is switched 'ON' as air quality progressively deteriorates or CO2 concentration increases (>1200 ppm). And only switches 'OFF again when air quality is good (<800 ppm) or CO2 concentration is low.

Steinel PRO IR Quattro HD Motion Detector Specifications

European Article Number (EAN) 4007841592707
Dimensions(h x w x d) 120 x 120 x 49 mm
Application inside buildings
Installation Ceiling
Type of gas CO2
Voltage 230 VAC
Signalling mode Visual/acoustic
Operating voltage 230 V
CO2 measurement range 400 – 2000 ppm
CO2 accuracy 5% of value measured ± 150ppm (at 25°C and 1013 hPa)
Indicated by LED Green: up to 1000 ppm CO2 (light 'ON' permanently, can be switched 'OFF')
Orange: from 1000 ppm CO2 to 1500 ppm CO2, (light permanently 'ON')
Red: over 1500 ppm CO2 (flashing)
Acoustic warning signal: every 5 min. above 1500 ppm CO2 (can be Temperature dependence of CO2 < 5 ppm per °C
Temperature (storage) -40-+70 °C
Relay (function) Relay ON from 1200ppm
Relay OFF below 800 ppm (with falling CO2 concentration)
Response time (T90) 5 min
Signal output Contact type: type 1.3v Housing Standardised concealed box
IP rating IP20
Protection class II
Model AP

All these products include mounting adaptors, please state when you order if you want surface or recessed.

Sale: £149.70 Ex VAT
Save: 5% off

£179.64 Inc VAT

315 reward points

 Sold Out 
  • Mpn: 592707
  • 0 Units in Stock
  • Manufactured by: Steinel

Ask a question about the Steinel Presence Control Air Control PRO Signal AP

Price beat for the Steinel Presence Control Air Control PRO Signal AP