Are you in the trade?

Visit our trade site here

and apply for up to 30% off"

Price Match

Steinel RS PRO LED B1 Emergency Sensor Light PMMA CW

Steinel RS PRO LED B1 Emergency Sensor Light PMMA CW

Introducing the Emergency Light version of the RS PRO LED S1 Sensor Light. In compliance with the EN 60538-2-22 it has a rechargeable back up battery so that in the event of a power failure it will automatically switch on the integrated emergency LED Light, it is therefore ideal for commercial or industrial locations such as office corridors, stairways and WC facilities where there's a need for decentralised, standard-compliant emergency lighting.

Although the practicality of the Emergency light feature is a great benefit to the RS PRO LED B1 the quality of the highly intelligent Sensor Light also shines through. Equipped with a high frequency sensor with a 360 degree angle of coverage, which responds to any movement within a 8m reach even through glass, wood and stud walls. Which is all located behind the impact-resistant PMMA plastic shade protecting it from carelessness and keeping it out of sight. The detection zone of the sensor can be tailed to suit your needs as it can be infinitely adjusted from 1-8m and limited in 4 directions, with a total area coverage of 50m2.

The RS PRO LED B1 is also packed full of Steinel's innovative LED technology, the 16 W LED in this light provides a luminosity of 794 lm and a cool white colour. The LED Active-Thermo-Control cooling system automatically monitors and controls the temperature of the LEDs, which helps the LED reach their maximum life expectancy of 50,000 operating hours, saving you the need to ever change a light bulb again!


- Dimensions(w x h x d): 300 mm dia. x 67 mm
- Voltage: 230-240 V/50 Hz
- Sensor type: High Frequency
- Transmitter power: approx. 1 mW
- HF-system: 5.8 GHz (responds to the tiniest movement regardless of temperature)
- Output: 16 W LED
- Brightness (with shade) PMMA plastic: 794 lm
- Brightness (without shade): 1200 lm
- Efficiency (without shade/diffuser): 75 lm/W
- Efficiency (with shade/diffuser): PMMA plastic: 49.6 lm/W
- Light colour: 4000
- LED life expectancy: 50000 h
- Detection angle: 360° with 160° angle of aperture
- Detection: also through glass, wood and stud walls
- Reach: 1-8 m reach all round, infinitely variable, can be limited in 4 directions
- Max. area covered: 50 m²
- Response brightness: 2-2000 lx
- Time setting: 5 sec. - 15 min.
- Install Mode: Yes
- IP rating: IP20
- Protection class: I
- Impact-resistance: IK03
- Temperature range: -10 - +50 °C
- Version: PMMA CW
- Material: Aluminium base and plastic shade
- With lamp: STEINEL LED system

Sale: £180.35 Ex VAT
Save: 5% off

£216.42 Inc VAT

380 reward points

 Sold Out 
  • Mpn: 374723
  • 0 Units in Stock
  • Manufactured by: Steinel

Ask a question about the Steinel RS PRO LED B1 Emergency Sensor Light PMMA CW

Price beat for the Steinel RS PRO LED B1 Emergency Sensor Light PMMA CW