Are you in the trade?

Visit our trade site here

and apply for up to 30% off"

Price Match

Honeywell Ade Intellisense AG8/WB Live Bell Box

Honeywell Ade Intellisense AG8/WB Live Bell Box

Honeywell ADE Optima and Accenta products have been installed in over 3 million homes in the UK. The AG6 range offers the installer the reliability of a wired system, conforming to CE specifications, and offers a wide range of accessories in a cost-effective package.

With its attractive housing, flexibility to mount vertically or horizontally and front and rear mounted tamper protection; the AG6 meets all requirements for residential and commercial applications. You can't miss the 116dB piercing siren and the high-visibility xenon flashes and neither will your neighbours and the intruder. To avoid noise pollution the sounder timer selection can be configured to reset itself after a pre-set time interval. Additional test modes allowed short alarm burst (5 seconds) when testing the alarm operation during commissioning.


- High impact polycarbonate moulding
- Horizontal or vertical mounting
- One standard ‘built-in’ wrap around strobe lens
- NiCad back-up battery included
- Multi colour options
- Front and rear tamper
- Up to two Piezo sounders
- Diagnostic LEDs
- Silent start up
- Dual tones
- Current flow monitor

Technical Specifications

- Dimensions: 55 mm x 200 mm x 300 mm (h x w x d)
- Weight: 840g
- Hold off Supply: 13.65 VDC nominal, 12~14.5 VDC
- Load Current: AG6: 35mA nom.: quiescent, 350mA nom.: combined sounder and strobe. 125mA nom.: strobe only
AG8: 35mA nom.: quiescent, 400mA nom.: combined sounder and strobe. 170mA nom.: strobe only
- Sound Output Level: AG6 110dB @ 1m nom. (supply & mounting dependent)
AG8 116dB @ 1m nom. (supply & mounting dependent)
- Battery: 6.0V, 280 mAhr Nicad
- Operating Temperature: -20ºC to +40ºC, operating & storage
- Humidity: 5%~95% Relative humidity, non-condensing
- Trigger Conditions: Automatic reset occurs when trigger clears
- Triggers: Loss of hold off supply, S-Negative Trigger (-V applied), Trigger occurs when terminal voltage is less than 3.5V, Maximum load 1.0 mA
- Tamper Detection: Wall and cover retaining screw
- LED 1 & 2: AG8 Twin alternating LED; also used for diagnostics
- Cut off Timer: 15 minutes nom. (sounder only)
- Strobe Trigger: -V applied
- Strobe: AG6 0.6 Joules per flash, Flash rate 2 flashes per second nom. @ 13.65 VDC strobe supply
AG8 0.6 Joules per flash, 1 flash per second nom. @ 13.65 VDC strobe supply
Strobe Selectable AG8 Alternate 1 flash per second nom. @ 13.65 VDC, Dual 1 flash per 2 seconds nom. @ 13.65 VDC 2 strobes,
Dual 1 flash per 1 second nom. @ 13.65 VDC 1 strobe
-Standards: EN50131-4:2009 Grade 2


Sale: £24.47 Ex VAT
Save: 5% off

£29.37 Inc VAT

52 reward points

Add to Cart:

  • Mpn: AG8/WB
  • 981 Units in Stock
  • Manufactured by: Honeywell

Ask a question about the Honeywell Ade Intellisense AG8/WB Live Bell Box

Price beat for the Honeywell Ade Intellisense AG8/WB Live Bell Box